TIGERTALK from TigerTek Industrial Services
MACHINESHOP FABRICATION & NEW PRODUCT SALES 
Logo 
February 2012
Machine Shop Capabilities
Custom Electric Motors
Ask Darryl:
Why does rewinding take so long?
Meet TigerTek: Jay (Servo Dept Mgr)
Greetings! 

We hope that your factory machinery never breaks down,  

but if it does...... 

 

TigerTek is just a phone call away.

Collage and Mike
Some typical repair items

 

We are the largest, local repair center,  

in central NC and southern VA for:   

(click any dept for more info) 

 We also offer: 

 

 Collage and Josh 

These are a couple of 200 HP motors we are working on now in our Motor Repair Dept.

 

One is from a local city's fresh water pump station,  

and the other is from a lumber saw mill.

 

  

Horizontal, Split Case Pump  

 

Our Pump Repair Dept rebuilt this horizontal, split case pump.

We cleaned and descaled the pump interior; checked all machine fits for proper tolerances; repaired all worn areas; replaced bearings, seals and gaskets; assembled and vacuum tested.

 

 

 

"Our guarantee - if you're not satisfied, 

we'll give you your money back"

  

If you never tried us before, please use Discount Code "VIP2012" to get 10% off your first repair.

 

Please remember TigerTek for your next repair, machine shop project, 

or new electric motor quote.

 

More info at: www.tigertek.com, or call (336) 623-1717
Machine Shop Capabilities

Machine Shop Part 

Do you need any custom machine shop parts?

 

TigerTek is the perfect choice for high precision parts and we're happy to quote large, or small production quantities.

We have the necessary lathes and mills to provide fast turn-around-times, and cost-saving prices.

Please give us a call and we'll send a salesman over to quote your requirements.

 

More info at: Machine Shop Department 

 

 

Custom Built Electric Motors

Custom Baldor Motor 

A local paint plant was experiencing premature motor failures in a tough application. TigerTek engineers worked with them to specify a custom built severe duty motor with a special flange, and shaft.
Baldor manufactured the motor, and TigerTek machined the coupling.

A cost saving solution, which has reduced maintenance problems

and repair costs.

TigerTek is a master distributor for the following brands of motors:

 

Baldor/Reliance, Leeson Electric, US Electric, WorldWide Electric, Teco/Westinghouse, Lincoln Electric, Sew Eurodrive, CEG, Brook Crompton, Lafert, Hyundai, etc.

   

Please give us a call for your next electric motor quote.

(336) 623-1717

Click for more info: Electric Motors 

 

Ask Darryl

"Why does rewinding a motor take so long?"Ronnie

 

Rewinding a motor requires a number of sequential steps.

The primary procedures include:

  • Burn out the old winding in an oven
  • Reinsulate the stator laminations
  • Fabricate and insert replacement copper coils
  • Dip the new windings
  • Cure the finish in a bake oven

For a typical 50hp motor, this process might take 2 to 3 days.

 

But, a professional rewind is key to maintaining motor performance and efficiency.   

      

Darryl Oakley


Darryl Oakley is TigerTek's Vice President of Operations. 
He has over 40 years experience in the industry.

Send your questions to darryl.oakley@tigertek.com 

Meet TigerTek: Jay (Servo Department Manager)
Jay Booton

Jay is our Servo Motor Repair Department Manager.  

TigerTek is the largest servo motor repair facility in the USA.  

More info at: Servo Motor Department 


Prior to joining TigerTek, he was in the US Army where his specialty was Precision Measurement Electronics.
Jay is an accomplished musician - he plays bass guitar and has his own band.

 

Please call (336) 623-1717 
or e-mail us to help solve your next REPAIR problem.

2741 NC HWY 135 | Stoneville, NC | 27048
 phone 336.623.1717 | fax 336.623.1725 | www.tigertek.com

Servo Motor Repair Services

Fanuc Servo Motor Repair
Pacific Scientific Servo Repair
Yaskawa Servo Motor Repair
Siemens Servo Motor Repair
Allen Bradley Servo Repair
Additional Servo Brands Serviced

Additional Servo Repair Info.

General Repair Info. - Fanuc Servo Motors
Fanuc Servo Maintenance & Parts List
Fanuc Servo Motor Repair - Technical Specifications
General Repair Info. - Yaskawa Servo Motors
Repair Services - Yaskawa Linear Servos
Repair Services - Yaskawa Rotary Servos

Electric Motor Repair Services

Servo Motor Repair
Stepper Motor Repair
Permanent Magnet / PMDC Motor Repair
Spindle Motor Repair
Servo Motor Resources

TigerTek Industrial Services

Product Sales
Greensboro Industrial Repairs
Press
Newsletter Sign-Up
Order Servo Motor Repair
Contact TigerTek
Site Map


For national servo motor repair, stepper motor repair & other industrial services, including Fanuc servo motor repair, spindle motors,
brushless motors, and more, TigerTek is your servo motor repair source. Our specialty is lightning-fast in-house servo repair for all major brands.
All servos are expertly repaired with OEM parts and quickly returned like new, complete with 1 year warranty.
TigerTek Industrial Services, Inc. | 2741 NC Hwy 135 | Stoneville, NC 27048
© Copyright , TigerTek Industrial Services