|Servo Motor Repairs|
(click for more details)
TigerTek specializes in REPAIRING:
Companies like Goodyear, Procter & Gamble, NASA, etc select TigerTek because we provide:
Reliability: TigerTek repairs thousands of servo motors each year, so your motor is being repaired by an experienced factory-trained technician.
Fast Turn-Around Times: We offer several PRIORITY options, from RUSH repair to NORMAL.
Cost Effective: If your servo motor is damaged beyond economical repair, we can quote a new replacement, or a reconditioned motor
Excellent Customer Service
: Call 877 623-1717 if you have any technical questions, or need any additional information.Click for more information.
|Servo Motor Feedback - Absolute and Incremental Encoders|
The "Technical Resource Pages" on our website are a wealth of information.|
We've just added a new article which details the fundamental differences between absolute and incremental encoders.
Please click to access this article.
(Toll Free 877 623-1717)
|Dept of Energy - Motor Compliance Update|
Small Electric Motor regulations will go into effect in the United States on March 9, 2015. This will be the first time these specific motors will be regulated in the world.
Motor manufacturers will be reviewing their product lines and determining if redesign will be required to bring products up to the required efficiency levels.
Motors covered under these new regulations range from 1/4- to 3hp and include single- and poly phase two-, four- and six-pole general purpose motors in NEMA 42, 48 and 56 frames and corresponding IEC equivalent motors and frames.
We'll keep you posted on updates.
(Toll Free 877 623-1717)
|Can a motor lose it's efficiency after rewinding?
YES if your repair center does a "fast burn-out".
NO if you carefully manage the oven burn-out procedure.
The following 3 issues are critically important:
- Control the oven temperature below NEMA standards. Increasing the temperature to give you a fast burn-out can kill motor efficiency.
- Control flame-outs. Use a modern oven with water vapor suppression to avoid runaway combustion.
- Control the time span. By programming the temperature rise and cool down, you avoid stator warpage
Motor efficiency measures energy loss. Energy loss means that you are wasting money by using a motor, which is no longer working at its peak performance. So it's really important to get a good rewind and a quality repair.
Darryl Oakley is TigerTek's Vice President of Operations
He has over 40 years experience
in the industry.
Send your questions to firstname.lastname@example.org
|Meet TigerTek: Bert (Machinist)|
Bert is a key member of our machine shop team. He's a graduate machinist with over 35 years experience. He supports our repair operations by repairing servo motor shafts, endbells, armatures etc. He also fabricates custom precision parts.
One of his hobbies is to make mead; a honey wine that dates from the middle ages. It incorporates honey, yeast, raisins, berries, etc.
Folks say "it's good!"
Please contact us to quote your next servo motor repair opportunity.
Phone: 877 623-1717 (toll free)
2741 NC HWY 135 | Stoneville, NC | 27048