Spindle Motor Repair Services
Spindle Motor Repairs & Maintenance Services
TigerTek is the nation’s leading spindle motor repair shop and the repair provider of choice for companies across the country, from smaller facilities to large Fortune 500 manufacturers! Our spindle motor repair specialists have the expertise, technical ability, and lightning-quick turnaround time required to minimize your downtime with a run-tested, guaranteed spindle motor repair. We service all major brands of spindle motors, including Fanuc, GE, Mitsubishi, and many more.
All motors are repaired in our electric motor maintenance shop – always in-house, and never by an outsourced vendor. Our technicians use OEM parts from our massive inventory, ensuring that your spindle motor is returned to factory specifications before being run-tested and undergoing extensive quality assurance checks in our lab. All spindle motor repairs are then shipped directly from TigerTek back to your facility, complete with a one year warranty. Contact your repair specialist to discover the TigerTek difference today!
Spindle Repair Tips from TigerTek
An improper spindle motor repair process is actually a leading cause of spindle motor failure. At TigerTek, we know that exact tolerances, performance standards, and cleanliness levels are critical to avoiding premature spindle failure. When seeking a spindle motor repair vendor, look for a shop that maintains the following standards:
- Certified Facilities – all repair facilities must be certified as a Class 10,000 Clean Room. The repair workstation itself should ideally be a certified Class 1000 Laminar Flow Bench.
- Prep Cleaning – A 3 micron “absolute” filtration for solvents must be maintained throughout the process, but is especially key during the early stages of spindle repair. Compressed air used for cleaning must be filtered down to the .08 micron level and dried to a minimum dew point of -40 F.
- Proper Care of Open Bearings – Greased packed opening bearings are particularly susceptible to dust that may be roughly 5 microns in size. These very small particles are invisible to the naked human eye, which can typically only see matter of 40 microns or above. At all stages of the repair process, proper controls must be in place to prevent the introduction of foreign matter to sensitive areas of the motor.
Spindle Motor Brands Repaired
TigerTek’s national spindle motor repair service offers guaranteed maintenance, repairs, and services for the following major brands. If you don’t not see a particular manufacturer listed, please contact us - our facility is equipped to handle the vast majority of motors, so we can most likely meet any service needs.
|Boneham & Turner
|Brown & Sharpe
|CMS N. America
||J & L
||Jones & Lamson
||Jones & Shipman
||K O Lee